Publicité
1. Screw
2. Projection
1. Vis
2. Saillie
1. Tornillo
2. Protuberancia
5. Install the mixing chamber cap and tighten it.
6. Install the securing plate by installing the
NOTE:
When installing the securing plate, align the slot
in the securing plate with a projection on the car-
buretor mixing chamber cap.
3. Slot
3. Fente
3. Ranura
7. Install the carburetor and tighten the clamp
8. Connect the fuel hose and the oil hose.
9. Tighten the carburetor float bowl drain
8-49
screw.
screws.
screw.
Publicité
