Publicité
99638951_A_FR GB.qxp
T
r o u b l e s h o o t i n g
If you're not sure that your oven is working properly, it doesn't necessarily
mean that there's a problem. In all cases, check the following points:
I
f you realize that..
The oven isn't heating.
Err: "V" is displayed
Err: "M" is displayed
The light inside the oven isn't
working.
The cooling fan keeps working
after the oven is turned off.
Cleaning by pyrolysis has not oc-
curred.
20
02/03/2006
10:18
Page 20
P
ossible causes
• The oven isn't connected to the
power supply.
• The fuse has blown.
• The temperature selected is too
low.
• The sensor is faulty
• The oven has overheated. It has
been put out of use for safety
reasons
• The door lock is faulty.
• Pyro cleaning requested while
the door is already locked
• The temperature sensor is faulty.
• The lamp is unusable.
• The oven isn't connected to the
power supply or the fuse has
blown.
• The fan can keep working for up
to an hour after the oven switches
off if is over 125ºC.
• If it has not stopped after 1 hour
• The door is not shut properly.
• The door-locking system is faulty.
• The temperature sensor is faulty.
• The plate that detects when the
door is shut is faulty.
w
hat should you do?
- Connect to power supply.
- Change the fuse, checking that it is
16A.
- Increase the temperature selected.
- Contact the After-Sales Service.
- Contact the After-Sales Service.
- Contact the After-Sales Service.
- Contact the After-Sales Service.
- Contact the After-Sales Service.
- Change the bulb.
- Connect to power supply or chan-
ge fuse.
- Open the door to help the oven
cool
down
more
quickly.
- Contact the After-Sales Service.
- Check the door is properly closed.
- Contact the After-Sales Service.
- Contact the After-Sales Service.
- Contact the After-Sales Service.
Publicité
