Adjusting The Open Time - Häfele FT 200 Instructions D'utilisation

8.5 Adjusting the open time

Prerequisites:
1. Hold the programming key card in front of the
antenna.

Acoustic signal is heard. LED illuminates
green.
x
3. Hold the clearing key card in front of the
antenna again.

An acoustic signal is heard at one second
intervals.

The LED flashes in green in parallel to the
acoustic signal every second (max. 30 sec).
The open time can be adjusted at any time, and is also retained after a power supply
interruption or a simple reset.
The open time can be extended beyond 30 sec. with the MDU 110 using a special
function or a macro (
After a complete reset or setting the FT 200 / FT 200 CAP furniture terminal to
"permanent deadbolt lock operation", the set opening time is cleared and the factory
setting of 3 sec or deadbolt lock operation are activated.
64
Tag-it ™ISO
Programming key card
1x/s 1x/s

Macros, page 45).
Tag-it ™ISO
Clearing key card
x
x
2. Hold the clearing key card in front of the
antenna.

Acoustic signal is heard. The LED flashes
quickly in green.
4. Remove clearing key card after the required
time.


The LED illuminates permanently in red.

The open time is set for all locks and
authorised user keys.