Allocating The User Keys In Keyed To Differ Operation (Ft 200 + Max. 1X Mla 8); Allocating User Keys By Means Of Consecutive Lock Allocation - Häfele FT 200 Instructions D'utilisation

8.4 Allocating the user keys in keyed to differ operation (FT 200 + max. 1x MLA 8)

8.4.1 Allocating user keys by means of consecutive lock allocation

Tag-it ™ISO
Prerequisites:
1. Hold the programming key card in front of the
antenna until the acoustic signal sounds 2x and
the LED illuminates in green.
3. Hold all user keys which are to be given the
locking authorisations for lock 1 in front of the
antenna one after another.

An acoustic signal sounds as confirmation,
and the LED briefly illuminates in green.

Lock 1 is now allocated to these user keys.
LED continues to flash in green 1x/sec. for
approx. 15 seconds.
Programming key card
1x 2x
2. Remove programming key card.

LED flashes in green 1x/sec. for approx. 15
seconds.

Lock 1 is unlocked.
1 s
4. Hold the programming key card in front of the
antenna again until the acoustic signal sounds
once. The LED flashes in green 2x in
succession.
Userkey
1x/s #1
1x 2x
61