Publicité
Setting up the charging station
Primary plug
The primary country adapter of the power supply is interchangeable, this enables worldwide
operation. Fig. 7 and Fig. 8 describe the procedure of changing the plug.
Fig. 7
EU
Fig. 8
After you have checked the mains voltage indicated on the nameplate of the device, connect
the mains supply plug to the mains supply.
Set up or mount the visionPRO CS1 in such a way that it is easy to disconnect it from the mains.
The green LED on the mains plug indicates that the power supply unit is ready for operation.
To put the power supply out of operation just disconnect the power supply from the mains supply.
The visionPRO CS1 is intended for setting up and use in medical areas outside the patient
environment (at least 1.5 meters from the patient or patient support pursuant to IEC 60601-1,
see fig. 9).
Fig. 9
USA | Japan
UK
Australia
med 235340 2024-08-10
21 | 136
Publicité
