Vestfrost CFS 344 Mode D'emploi page 9

Change of hinge side
If you need to change the door hinge, proceed as follows:
1) Dismount the top hinge. The hinge is to
be used later as top hinge at the
opposite side. Lift off the door.
2) Remove the kick plate and then the lower
hinge. The hinge turned 180° and mounted
on the opposite side. Mount the door again.
3) Adjustment of the door - top:
Loosen the screws in the hinge above the
door and turn the hinge to the required
side. Tighten the screws.
4) Adjusting the door - bottom: Loosen the
screws in the lower hinge and push
the hinge to the required side.
Tighten the screws and mount the kick
plate.
The kick plate.
5) Move the handle.
Cover for handle holes
mounted
9
GB