Publicité
Les langues disponibles
Les langues disponibles
Installation
See drawings - page A and B. Install the
cabinet in a dry place and so that it is not
exposed to direct sunlight or any other heat
source.
Place the cabinet in a level position. This is
easily achieved by adjusting the adjustable
feet at the front edge of the base.
The cabinet may not rest against a wall on
its hinged side. When placing the cabinet
on carpet or on wooden floor you should
adjust it once more after some time as the
cabinet might settle in soft foundati ons.
If you want to build the appliance into a
cupboard you must consider 3 factors:
1. There must be space above the appli-
ance in order to make the cooling system
work satisfactorily.
2. When the door is opened the appliance
takes up more room than the width of
the cabinet and therefore the door must
either be placed outside the cupboard or
there must be a space of at least 1,5 cm
at the hinge side.
3. The distance to the wall at the hinge side
must be of a sufficient size.
Furthermore it is possible to build together
two appliance. If one of these is a wine
cabinet please observe a min. distance of
25mm between the cabinet in order to keep
cooling performance intact.
It is safest to place the earthed wall socket
abo ve the appliance and at least 1.7 / 2.0
m above the floor. Any local installation
rules for appliances of this kind must be
observed.
During a storm the electricity supply might
be cut off. You should be aware of this
when installing the appliance in weekend
cottages or elsewhere where you would not
immediately observe that the power has
been cut off. Construction and details in the
accessories are subject to alter ation without
previous notice.
Technical data
This device complies with relevant EU
directives including Low Voltage Directive
2006/95 EEC. and Electromagnetic Com-
patibility Directive 2004/108/EC
The rating plate provides various techni-
cal information as well as type and serial
number.
5
GB
Publicité
