Publicité
Congratulations! With your purchase you have
decided on a high-quality product. Get to know
the product before you start to use it.
Carefully read the following
instructions for use.
Use the product only as described and only
for the given areas of application. Keep these
instructions safe. When passing the product
on to a third party, always make sure that the
documentation is included.
Package contents (Fig. A)
1 x air pump (1)
1 x hose (2)
4 x valve adapter (3)
1 x instructions for use
Technical data
Rated pressure: approx. 8.702PSI/0.6bar
Displacement volume: 4L per cycle
Symbols used
Date of manufacture (month/year):
01/2019
Intended use
This item was developed for private use for inflat-
ing all common inflatable items. Not suitable for
inflating car tyres or bicycle tyres!
Safety information
Risk of injury!
• This product is not suitable for use by children
or people with physical and/or mental impair-
ments due to the item's high operating forces
and their associated risks.
• Check the item and especially the connection
points for damage or wear before each use.
Defective items may no longer be used
and must be disposed of as they cannot be
repaired.
• While you are inflating, pay attention to the
item being inflated. There is a risk of an explo-
sion if there is excess pressure!
• A calibrated pressure gauge must be used to
monitor the pressure while inflating.
6
GB/IE
Use
• Warning! Ensure that there are no
kinks in the air pump hose!
• Operate the air pump with a steady action
and not too fast.
• Always place both feet on the air pump and
operate it using both hands.
1. Insert the end of the hose (2) into the air
pump's plug connecter (1) and rotate.
Note: The end of the hose must visibly and
audibly click into place.
2. In order to pump air into an inflatable item,
select the plug connector marked 'INFLATE'
(Fig. B).
3. In order to deflate an inflatable item, select
the plug connector marked 'DEFLATE' (Fig. C).
4. Select the relevant valve adapter (3) and
insert it into the hose (2) (Fig. D).
Note: The valve adapter must visibly and audi-
bly click into place.
5. Push the valve adapter into the inflatable item
and pump it up.
Storage, cleaning
Always store the product in clean and dry con-
dition at room temperature. Only use water to
clean and wipe it dry with cleaning cloth.
IMPORTANT! Never clean the product with
aggressive cleaning agents.
Disposal
Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not
suitable to be given to children. Keep the packa-
ging materials out of the reach of children.
Dispose of the products and the
packaging in an environmentally friendly
manner.
The recycling code is used to identify
various materials for recycling.
The code consists of the recycling symbol
– which is meant to reflect the recycling cycle –
and a number which identifies the material.
Publicité
