Publicité
The function comes into operation:
•
5 minutes after the completion of the programme.
•
After 5 minutes if the programme has not started.
STARTING A PROGRAMME
1. Keep the appliance door ajar.
2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme
selection mode.
3. Press one of the programme buttons until the display shows the number of the programme you want to
set.
•
The display shows the programme duration after some seconds.
4. Set the applicable options.
5. Close the appliance door to start the programme.
OPTION HALF LOAD
This option is available with Eco , AUTOMATIC , Intensive and Normal .
With this option you can wash a small load of tableware and cookware. The option decreases the
programme duration and the consumption of water and energy. Load both baskets and use less quantity of
detergent.
OPTION MULTITAB
Activate or deactivate the Multitab option before the start of the programme. Activate Multitab option only
when you use the combi detergent tablets. This option deactivates the release of salt. The salt indicator
does not come on. The programme duration can increase.
This option in not applicable to Rinse and Hold and
26
.
Publicité
