Publicité
Daily use
Warning! Refer to Safety chapters.
Activating and deactivating
Touch
for 1 second to activate or deactivate the
hob.
Automatic Switch Off
The function deactivates the hob automatically if:
•
all cooking zones are deactivated,
•
you do not set the heat setting after you activate the
hob,
•
you spill something or put something on the control
panel for more than 10 seconds (a pan, a cloth,
etc.). An acoustic signal sounds and the hob
deactivates. Remove the object or clean the control
panel.
•
the hob gets too hot (e.g. when a saucepan boils
dry). Let the cooking zone cool down before you use
the hob again.
•
you use incorrect cookware. The symbol
on and the cooking zone deactivates automatically
after 2 minutes.
•
you do not deactivate a cooking zone or change the
heat setting. After some time
hob deactivates.
The relation between the heat setting and the time
after which the hob deactivates:
Heat setting
, 1 - 2
3 - 4
5
6 - 9
The heat setting
Touch
to increase the heat setting. Touch
decrease the heat setting. Touch
same time to deactivate the cooking zone.
Automatic Heat Up
If you activate this function you can get a necessary
heat setting in a shorter time. The function sets the
comes
comes on and the
The hob deactivates af-
ter
6 hours
5 hours
4 hours
1.5 hour
to
and
at the
highest heat setting for some time and then decreases
to the correct heat setting.
To activate the function the cooking zone
must be cold.
To activate the function for a cooking zone: touch
(
comes on). Immediately touch
on). Immediately touch
comes on. After 3 seconds
To deactivate the function: touch
PowerBoost
This function makes more power available to the
induction cooking zones. The function can be activated
for the induction cooking zone only for a limited period
of time. After this time the induction cooking zone
automatically sets back to the highest heat setting.
Refer to "Technical data" chapter.
To activate the function for a cooking zone: touch
.
comes on.
To deactivate the function: touch
Timer
Count Down Timer
You can use this function to set how long the cooking
zone should operate for a single cooking session.
First set the heat setting for the cooking zone then set
the function.
To set the cooking zone: touch
until the indicator of a necessary cooking zone comes
on.
To activate the function or change the time: touch
or
of the timer to set the time (00 - 99 minutes).
When the indicator of the cooking zone starts to flash
slowly the time counts down.
To see the remaining time: set the cooking zone with
. The indicator of the cooking zone starts to flash
quickly. The display shows the remaining time.
To deactivate the function: set the cooking zone with
and touch
. The remaining time counts back to
00. The indicator of the cooking zone goes out.
(
comes
until the correct heat setting
comes on.
.
or
.
again and again
21
Publicité
