Publicité
EN
All manuals and user guides at all-guides.com
- TIMER mode. Double-press the MENU button
to select this mode. "0:00" will appear
on the display, and ":00" will be blinking. Press the +/- button to select the number of minutes
you need, then confirm the value by pressing the MENU button
again. "0:" will be blink-
ing. Press the +/- buttons to set a certain number of hours of the burner operation. Wait for 8
seconds, then the timer will be fixed and the countdown will start on the screen. The timer can
be set up to 24 hours of operation. If you need to turn off the timer, tap the TIMER button once
when the timer blinks for 8 seconds.
- press the lock button
to lock the control panel of the stove from any settings changes
while the button is pressed. The active lock will be shown by the corresponding indicator light
above the lock button. Press the lock button
again to cancel the locking mode.
5. Press the ON/OFF button after cooking is finished
, and the OFF sign will appear on
the display. Remove the dishware from the burner only after it is turned off.
6. Wait for the cooling fans to stop working and shut off the power supply.
1. The signal lamp MAINS will light up and the OFF sign will appear on the display after con-
necting the unit to the mains.
2. Place the dishware on the burner.
3. Press the ON/OFF button to turn on the cooker
, and the ON sign will appear on the
display. The cooker is ready for operation and is in standby mode.
4. Select the desired operating mode of the burner by pressing the MENU button
(TIMER mode can work simultaneously with one of the POWER or TEMPERATURE modes):
- POWER mode with 1,800 W setting. Press the + or - buttons to change the value to 400, 600,
1,000, 1,200, 1,500, 2,100, 2,400, 2,700, 3,000, 3,300, and 3,500 W.
- TEMPERATURE mode. Temperature will be set to 130°C after selecting this mode. Turn the
knob to set 60, 80, 100, 120, 130, 140, 150, 160, 170 ,180, 200, 240, and 280°C.
27
Publicité
