Publicité
EN
3. Press the ON/OFF button to turn on the cooker
display. The cooker is ready for operation and is in standby mode.
4. Press the MENU button
8". Select the desired power mode from "P1" to "P10" by pressing the + or - buttons. The display
will show "180" if the MENU button
ates in the temperature control mode; press the + or - keys to select the desired temperature
of 60 to 240°C.
5. Press the ON/OFF button after cooking is finished
the display. Remove the dishware from the burner only after it is turned off.
6. Wait for the cooling fans to stop working and shut off the power supply.
1. The signal lamp MAINS will light up and the OFF sign will appear on the display after con-
necting the unit to the mains.
2. Place the dishware on the burner.
3. Press the ON/OFF button to turn on the cooker
display. The cooker is ready for operation and is in standby mode.
4. Select the desired operating mode of the burner by pressing the MENU button
(TIMER mode can work simultaneously with the POWER mode):
- POWER mode with 1,800 W setting. Press the + or - button to change the value to 400, 600,
1,000, 1,200, 1,500, 1,800, 2,100, 2,400, 2,700, 3,000, 3,300, and 3,500 W.
- Power indication. Press the MENU button
show the current power value. The actual value depends on the diameter of the dishware bot-
tom, quality of the dishware, thickness of the dishware bottom, parameters of the mains, and
might differ from the set value. The display shows the current power value for 5 seconds, then
the set power value will be shown.
26
All manuals and user guides at all-guides.com
, and the display will show "P8", which means "power mode
, and the ON sign will appear on the
is pressed again. This means that the cooker oper-
, and the OFF sign will appear on
, and the ON sign will appear on the
while the cooker is in operation, and it will
Publicité
