Publicité
SECTION 4: CLEANING & MAINTENANCE
•
To prevent accidental activation, unplug the power cord before installing or
disassembling parts and before cleaning.
•
Make sure that the device is never immersed in water.
•
You should never place the appliance in the dishwasher.
•
To ensure lasting and effective performance, clean the device after each use.
•
Do not use sharp, aggressive or abrasive cleaning agents.
•
Make sure all parts are thoroughly dry before using them again. Do not use the
device if it is damp.
1. Before cleaning, remove the plug from the socket and wait until the device has cooled down.
2. Remove the used accessories and use a damp cloth to clean the housing.
3. The mixing bowl, whisk, dough hook, mixing hook, fine grater, coarse grater, cutter, sausage stuffer,
kibbeh nozzle and cookie maker are dishwasher safe.
4. Make sure that all parts are clean and dry after each use.
SECTION 5: TROUBLESHOOTING
CAUTION: To prevent accidental activation, unplug the power cord before assembling or disassembling
parts and before troubleshooting.
Problem
The machine doesn't
work
Hold the cutting mill,
connect it to the
transmission part of
the front cover and
turn it
counterclockwise to
the lock position.
Cause
The power cord is not
properly connected
The thermal protection for
the motor has been
activated
The upper house is tilted
upwards
Solution method
Check the power cord and make sure
the power is on
Let the appliance cool down for at least
10 minutes
Set the tilt switch to "0" and lower the
top housing back down, return the
speed control to "0" and then select a
speed
31
Place a container or
bowl near the outlet
of the cutting mill.
Plug in the plug and
set the speed knob
to the desired speed.
Wash the vegetable
and cut it into small
pieces. Place the cut
vegetables one by
one into the feed
opening
of
the
cutting mill. Use the
pusher to push the
vegetable into the
feed opening of the
cutting mill.
Publicité
