Publicité
Place a container or bowl near the outlet of the grinder. Prepare the dough and cut it into small strips.
Plug in the plug and set the speed knob to the desired speed. Place the dough into the grinder via the
plateau. The cookies are squeezed out of the cookie nozzle. If necessary, use the push rod to slowly push
any remaining dough into the feed opening of the grinder.
After use, turn the speed knob to "0" and pull the plug from the socket.
3.8 VEGETABLE CUTTER
•
Be careful of the rotating parts when using another part
•
Do not plug in the power plug before using the cutting mill. Make sure the cutting
mill is installed correctly before using it.
•
Never put your fingers or other body parts into the grinder.
•
Never use all the vegetables in the standmixer at once. Cut it into small pieces.
Place the spiral
shaft in the
grinder. Place the
separator on the
spiral shaft. Place
the cookie base on
the separator.
Tighten the sealing
ring on the grinder.
Place the cookie
nozzle on the
cookie base.
Hold the grinder,
connect it to the
transmission part
of the front cover
and turn it
counterclockwise
to the lock position.
Place the desired
vegetable grater in
the cutting grinder.
30
Remove the front
cover from the
standmixer.
Align the
discharge port of
the platter with
the input port of
the grinder and
install it in place.
Remove the front
cover from the
standmixer.
Publicité
