Inserting The Battery - Sonetik Gohearin Mode D'emploi

Inserting the Battery

Step 1: Apply light pressure on the notch on the battery
door, and swing the door open. Do not force it. Remove
the battery. If you have difficulties removing the small
battery with your fingers, use a pen nib to push it out of
its compartment.
Step 2: To ensure proper battery
usage, please remove the tag
from the battery and allow the
battery to sit for two minutes
before inserting it into the hearing
aid. Insert the battery carefully with the «+» side up,
facing the side where the product information is printed.
Step 3: Swing the door into the closed position. The
door should close easily. Do not
force it. If there is resistance,
check that the battery has been
inserted correctly.
The life of your hearing aid battery will vary depending
on length of daily use, listening environments, and how
your hearing aid is programmed. When the hearing aid
battery goes dead, remove it immediately and replace
it with a new battery. Batteries may be purchased from
your Sonetik Specialist.
11