Inserting The Battery - Sonetik GOhear-on Mode D'emploi

Inserting the Battery

Step 1: Apply light pressure on the latch on the battery
door, and swing the door open. Do not force it. Remove
the battery.
Step 2: To ensure proper
battery usage, please remove
the tag from the battery and
allow the battery to sit for two
minutes before inserting the
battery into the hearing aid.
Insert the battery carefully with
the "+" side up, matching it to
the "+" on the battery door.
Step 3: Swing the door into the closed position. The door
should close easily. Do not force it. If there is resistance,
check that the battery is inserted correctly.
The life of your hearing aid battery will vary depending on
length of daily use, listening environments, and how your
hearing aid is programmed. When the hearing aid battery
goes dead, remove it immediately and replace it with
a new battery. Batteries may be purchased from your
Sonetik Specialist.
Line up the + sign on the battery
door to the + sign on the battery
11