Télécharger Imprimer la page

SilverCrest SBLL 3 A1 Instructions D'utilisation Et Consignes De Sécurité page 10

Publicité

Charging
The integrated rechargable battery
must be charged prior to first use.
Note: This product may not be
charged via the USB port of note-
books etc.
When the integrated rechargable
battery is drained, a signal will noti-
fication sound every 2 minutes. The
LED
is blinking red. The inte-
5b
grated rechargable battery should
then be charged as soon as possible.
Depending on the volume and the
age of the battery, the operating
time for the device is approx. 8 hours
playback music or 7.5 hours lantern
light playback when fully charged.
Open the protective cover
Insert the micro-USB plug of the
charging cable
USB socket
1
speaker. Insert the USB plug of the
charging cable into the USB port on
a PC or a USB adapter (not included
in scope of delivery).
Note: The LED
red whilst charging and goes out
once charging is completed. The
charging time for a drained battery
is approx. 6.5 hours.
Note: The speaker may be used
whilst charging. However, doing so
will at a minimum double the charg-
ing time.
Once charging is complete, remove
the micro-USB plug of the charging
cable and close the protective cover
so the device is splash-proof again.
10 GB/IE/NI
.
2
into the micro-
12
of the Bluetooth
®
will light up
5b
Using the Bluetooth
speaker
Press and hold the Play / Pause
button
until the signal LED
9
flashes white and a signal of sound
sequence. The speaker will now at-
tempt to connect to the playback
device (e.g. smartphone or computer).
Establishing a Bluetooth
connection:
Remove all plugs from the AUX
stereo jack
3
Bluetooth
radio link.
®
Switch on the playback device and
approve the connection. Please note
the requirements of the software on
the playback device. The LED
will light up white and a signal tone
sequence sounds.
The speaker identification on the
playback device will be SBLL 3 A1.
Press and hold the
for 2 seconds until the
button 11
signal LED
5a
signal tone sequence sounds. The
speaker will now attempt to con-
nect to the playback device (e.g.
smartphone or computer).
The maximum range of the connec-
tion is approx. 10 m, but may be re-
duced to the geometry of the space
(obstructing furniture, walls, etc.).
The playback device must support
Bluetooth
standard 5.0. Otherwise
®
you may not be able to use all the
functions listed below.
5a
®
before you establish
5a
Bluetooth
flashes white and a

Publicité

loading

Ce manuel est également adapté pour:

313662