Télécharger Imprimer la page

Brandt BFC584YNW Manuel D'instructions page 43

Publicité

Troubleshooting
A layer of frost occurs in
the compartment
Temperature inside is too
warm
Temperature inside is too
cold
Doors cannot be closed
easily
Water drips on the floor
The light is not working
Check that the air outlets are not blocked by food
and ensure food is placed within the appliance to
allow sufficient ventilation. Ensure that door is fully
closed. To remove the frost, please refer to cleaning
and care chapter.
You may have left the doors open too long or too
frequently; or the doors are kept open by some
obstacle;
or
the
appliance
insufficient clearance at the sides, back and top
Increase the temperature by following the
«Display controls" chapter.
Check whether the top of the refrigerator is tilted
back by
10-15mm to allow the doors to self close, or if
something inside is preventing the doors from
closing.
The water pan (located at the rear bottom of the
cabinet) may not be properly leveled, or the draining
spout
(located
underneath
compressor depot) may not be properly positioned
to direct water into this pan, or the water spout is
blocked. You may need to pull the refrigerator away
from the wall to check the pan and spout.
The LED light may be damaged. Refer to replace
LED lights in cleaning and care chapter.
The control system has disabled the lights due to
the door being kept open for too long. Close and
reopens the door to reactivate the lights.
21
is
located
with
the
top
of
the

Publicité

loading

Ce manuel est également adapté pour:

Bfc584ynxBfc504ynwBfc504ynx