Publicité
USE & TIPS
"COLD AREA" indicator
The sign opposite can be found in your fridge.
It clearly shows the coldest zone of your appliance, where the temperature is lower than
or equal to +4°C.
A temperature gauge in this zone allows you to check the settings of your fridge.
Adjust the thermostat
Temperature correct
ok
Warning!
If the door of the fridge is left open for too long, the temperature inside the fridge will rise. Check the
temperature gauge within 30 seconds after opening the door to make sure that the reading is correct.
Setting the temperature:
-
Turn the temperature control knob to MAX, the
internal temperature of the refrigerator becomes lower.
-
Turn the temperature control knob to MIN, the
internal temperature of the refrigerator becomes higher.
-
The letter on the knob only represents the level, but
does not mean the specific temperature, the "OFF" means
stop working.
Recommended gear: "MED".
-
-
If there is no special needs, please avoid setting the
gear at MAX all the time so as to make sure you can
use
The figures do not mean specific set temperature, but
the temperature level.
"1" means the warmest setting.
-
"4" means the coldest setting.
-
-
The higher the figure is, the lower the actual temperature
inside refrigerator shall be, "OFF" means stop running.
Recommended gear: "3" gears.
-
-
It is recommended to adjust and use in the range if 1-4
gears. Exceeding this range may cause the refrigerator temperature
to be low.
35
Daily
Publicité
