Télécharger Imprimer la page

Brandt BST5080EW Manuel D'instruction page 35

Publicité

5. Install the door on the lower hinge assembly, and then install the upper hinge, hinge cover, pins and
hole cap in sequence.
Levelling the appliance
Choose a place to install the refrigerator on a flat surface.
Procedure for adjusting the feet at the front of the product
Electrical connections
Warning!
the plug must remain easy to access after installation.
• The electric connections must meet the applicable standards and be capable of withstanding
the maximum power shown on the ID plate.
• The power plug must be easily accessible and out of the reach of children.
• For your safety this appliance must be earthed. If the power plug is not earthed, consult a
qualified electrician to connect your appliance in line with applicable regulations.
• Do not use extensions, adapters or multiple plugs.
• Do not place multiple plugs or portable power supply units behind the appliance.
• The manufacturer declines all liability if the above-mentioned safety precautions are not
complied with. If in doubt, refer to your reseller.
If the appliance is not level, the doors will not be correctly aligned and
compartment sealing will not be ensured.
To level the appliance laterally, adjust the two adjustable feet on the front of
the product.
Once the appliance is installed, ensure that it is slightly inclined rearwards. In
this way, it will be easier to close the door. If necessary, adjust the setting of
the adjustable feet.
It must be possible to unplug the appliance from the mains power, so
34
Raise
Lower

Publicité

loading