Oase AquaMax Eco Premium 5000 Notice D'emploi page 33

Connecting
• Hoses or pipes can be connected to the inlet (IN) and outlet (OUT).
– Connections for hoses are part of the scope of delivery. Instructions for their installation
can be found below.
– An adapter for pipes with DN75/DN110 is available as an accessory (article number 35578).
• Ensure that the intake-side hose (IN) does not have a smaller diameter than the pressure-side
hose (OUT).
• The larger the hose diameter, the smaller the friction losses in the lines and the better the
flow rate.
• The hose diameter must not be limited unnecessarily by a hose sleeve. Shorten the hose
sleeve based on the hose diameter, if necessary.
• The pump can handle particles with a size of up to 11 mm. Larger particles will clog the pump.
We recommend installing a filter or skimmer on the intake side.
Do not plug the power plug into the socket yet!
EN
AMX0186
33