Publicité
INSTALLATION
Due to the high power output of the HDA-M80/
HDA-F60/HDA-V90 considerable heat is produced
when the amplifier is in operation. For this reason,
the amplifier should be mounted in a location
which will allow for free circulation of air, such as
inside the trunk. For alternate installation locations,
please contact your authorized Alpine dealer.
1. Attach the mounting legs to the bottom of the
amplifier with 8 screws.
2. Make sure there are no objects behind the
surface that may become damaged during
drilling.
3. Drill the screw holes.
4. Position the HDA-M80/HDA-F60/HDA-V90 over
the screw holes, and secure with 4 self-tapping
screws.
Holes (×4)
Mounting legs (×2) (included)
Screws (×8) (included)
(e.g. HDA-V90)
Self-Tapping Screws (×4)
(included)
(e.g. HDA-V90)
REMOVING THE TOP
COVER
To use the top inner panel, remove the top cover.
Top cover
Hexagon wrench
(included)
(e.g. HDA-V90)
3
-EN
Publicité
