ABC Design Turbo 6S Instructions De Service page 11

17. Inserting the mattress
Insert the mattress in the cover.
Lay the mattress on the base.
NB: The mattress is wedge-shaped. Make sure that the raised part is at the head end.
18. Fitting the cot on the pram
Recline the back of the seat. Position the carrycot on the pram.
Take hold of the strap which is fitted to the rear of the cot and pull it through the opening provided in the
seat cover.
Fasten and tighten the belt on the rear of the backrest.
Flip up the footrest at the lower end of the cot and secure the strap around the footrest. Fasten and tighten
the strap.
19. Fitting the apron
Fit the closed end of the apron over the lower end of the carrycot.
Extend the apron over the cot.
Secure the ends of the apron with the snap fasteners provided on the cot and cover
20. Fitting the foot muff
Undo the strap and position the liner on the seat.
Pull the five straps through the openings provided in the cover.
Now you can fasten the apron with the zip fastener on the liner.
EN - 08