Publicité
Les langues disponibles
Les langues disponibles
Message
Year Alarm Motor 2:
Month Alarm Motor 2:
EN
Day Alarm Motor 2:
Hour Alarm Motor 2:
Minute Alarm Motor 2:
Second Alarm Motor 2:
Alarm Probe Type 1:
Year Alarm Probe 1:
Month Alarm Probe 1:
Day Alarm Probe 1:
Hour Alarm Probe 1:
Minute Alarm Probe 1:
Second Alarm Probe 1:
Alarm Motor Probe 2:
Year Alarm Probe 2:
Month Alarm Probe 2:
Day Alarm Probe 2:
Hour Alarm Probe 2:
Minute Alarm Probe 2:
Second Alarm Probe 2:
IMPORTANT
In the case of not having manually set the date and time via Modbus, the referencing of the registered alarms will
take into account the date 01/01/21 and the time 00:00 from the moment the equipment was switched on and the
seal of the CR2032 battery was removed.
6.7.2. Software update
In order to load new software, before connecting the USB device to the ECOWATT PLUS unit, a file provided by S&P with
the extension ".specop.20" must be pasted inside it. Then follow the sequence of steps described above.
Once the USB is extracted, a file with the name and extension "REPORT.TXT" will be generated inside it. When opening
it, the message "Programming successful" will appear indicating the correct installation or, failing that, an error mes-
sage indicating the nature of the error.
7. MAINTENANCE
Before manipulating the fan, make sure it is disconnected from the mains supply even if it has previously been switched
off. Prevent the possibility of anyone else connecting it while it is being manipulated.
Fan unit must be regularly inspected. These inspections should be carried out bearing in mind the machine's working
conditions, in order to avoid dirt or dust accumulating on blades, impeller, motor or grids. This could be dangerous and
perceptibly shorten the working life of fan unit.
While cleaning, great care should be taken not to unbalance blades or impeller.
All maintenance and repair work should be carried out in strict compliance with each country's current safety regulations.
8. PUTTING OUT OF SERVICE AND RECYCLING
EEC legislation and our consideration of future generations means that we should always recycle materials
where possible; please do not forget to deposit all packaging in the appropriate recycling bins. If your device is
also labeled with this symbol, please take it to the nearest Waste Management Plant at the end of its service
life.
28
Description
Time and date of penultimate motor alarm
0: There has been no alarm
1: Last alarm recorded in AI1
2: Last alarm recorded in AI2
3: Last alarm recorded in AI3
Time and date of last concentration alarm
0: There has been no alarm
1: Penultimate alarm recorded in AI1
2: Penultimate alarm recorded in AI2
3: Penultimate alarm recorded in AI3
Time and date of penultimate concentration alarm
Publicité
