Télécharger Imprimer la page

Dustcontrol 9092-A Notice Originale page 8

Publicité

Les langues disponibles

Les langues disponibles

Safety Considerations
Read all instructions before attempting to operate this
machine and save these instructions.
Warning! When using electric machines, basic safety
precuations should always be followed to reduce
the risk of fi re, electric shock and personal injury,
including the following:
1.
Work area environment
Don´t expose the machine for rain. Don´t use it in damp
or wet locations or in presence of fl ammable liquids or
gases.
2. Overload
Never let the machine operate fully throttled. Always
follow the regulations pertinent to the material you are
working with ie asbestos. Don´t use the machine for pur-
poses that it isn´t intended for.
3.
Body injuries
Never let the suction come in contact with parts of the
body. Th e strong suction eff ect can hurt the blood-vessels
in the skin. Do not repair the electric components your-
self, get somebody qualifi ed. Faults may cause injury. See
also below under warnings.
4. Don´t abuse cord
Never pull the machine by cord. Keep cord from heat and
sharp edges. Check the electric cable regularly if damage.
TECHNICAL DATA
HxWxL
Weight
Inlet
Collecting sack 50 l
Hose length (φ 50)
Flow, max
Neg. pressure, max
Power consumption
Fine fi lter polyester, area
Degree of separation
(DIN 24184/3)
Filter area, microfi lter
Degree of separation,
microfi lter (DOP)
Sound level */
2011-06-17
5.
With cleaning and maintenance on the machine, the
power cable should be disconnected from the supply.
6. Maintain the machine with care
entired and that all gaskets are tight. Follow instructions.
Keep handles dry and free from oil and grease.
7.
Before futher use of the machine it should be carefully
checked that the machine is un damaged. If there are any
damaged parts these should be repaired by of a Dustcon-
trol authorized service center.
8. Warning
Use only accessories and replacable parts which are avai-
lable in Dustcontrol catalogue. When using faulty parts
or pirate parts (especially fi lter) the machine could leak
out unhealthy dust which can cause personal injuries.
Vacuum producer capacity
1800x760x1150 mm
ca 210 kg
kPa
φ 108 mm
40
700 x 850 mm
5-50 m
3
800 m
/h
20
28 kPa
9.2 kW
8.4 m
2
99.9 %
2
5 m
*/ Sound level at 1.6 m height and 1 m distance accor-
> 99,97 %
ding to DIN EN ISO 3744 in free space and at maximum
< 75 dB(A)
airfl ow.
DC 5800c 11 kW P - 8
Important measure
Keep machine clean and check that the hose is
Checking of damage
9,2 kW P
200
400
600
3
800
1000
m
/h
Part No 9092-A

Publicité

loading

Ce manuel est également adapté pour:

Dc 5800c 11 kw p