Publicité
Les langues disponibles
Les langues disponibles
Warranty
This manual is supplemented by
a Warranty Information Booklet.
We recommend that you read this
publication thoroughly.
Pay special attention to the appli-
cable duty cycle and to the limita-
tions that result. Failure to comply
with the warranty conditions will
void the Warranty.
The validity of the Warranty is also
dependent on proper installation
and maintenance operation being
carried out by an authorized Nanni
representative.
NOTICE: Late or improper mainte-
nance or use of spare parts other
than Nanni original spare parts will
invalidate Nanni's responsibility for
the engine accordance with homo-
logation and will void the Warranty.
Modifications to the engine's set-
tings, as well as any other tech-
nical modification (accessories,
spare parts, additional equipment,
etc) ARE FORBIDDEN WITH-
OUT WRITTEN AUTHORIZATION
FROM NANNI INDUSTRIES S.A.S.
Any modification will void the War-
ranty. Damage caused by failure
to follow operation instructions or
incorrect operation is also not cove-
red by the warranty.
13
Commissioning
inspection
Commissioning inspection is a
condition of the validity of the Limi-
ted Warranty. Moreover, it allows
the registration of the product at the
factory and record important infor-
mations regarding the product.
By registering the product, you will
receive the best warranty coverage
possible and Nanni will be able to
contact you in the event of updates
or service notifications.
Operations to be performed during
commissioning inspection are spe-
cified in the Warranty Booklet. The
commissioning inspection must be
signed by the seller and the owner
of the engine.
It's the owner responsibility to
control that the commissioning
inspection has been fully comple-
ted and signed by the person who
carried out the inspection.
The informations regarding the
RPM must be taken using an elec-
tronic tachometer. Never use the
tachometer of the instrument panel
for this purpose.
Publicité
