Sartorius Celsius S3 Mode D'emploi page 27

_Manual_Benchtop_Freeze_Thaw_System_S--6004-t210308_85034-538-54.indb 27 _Manual_Benchtop_Freeze_Thaw_System_S--6004-t210308_85034-538-54.indb 27
7
1
2
3
4
Fig. 17: Options Dialog – Hardware Tab
Pos . Control Description
1 Data acquisition The "None" option configures the application
device selector for no data acquisition. If a compatible National
Instruments data acquisition device is
detected, it will be automatically selected.
2 Chiller selector Selecting the "None" option configures the
application for no chiller. Selecting the "Huber
Unistat" option configures the application to
collect data from a Huber chiller equipped with
a Unistat controller, such as a Cryopilot A.
3 COM port selector Shows a list of available serial (COM) ports.
4 Shaker selector The "None" option configures the application
for no shaker. If a USB to Cryomixer Jr. cable is
detected, it will be automatically selected.
5 OK button Accepts the changes and closes the dialog.
6 Cancel button Discards the changes and closes the dialog.
7 Certificates tab Switches to the Certificates tab.
Operating Instructions Celsius
Cryopilot Software
5 6
S Benchtop System 27
® 3
01.04.2022 09:52:16 01.04.2022 09:52:16