SilverCrest SFW 350 C2 Mode D'emploi page 29

WARNING! RISK OF INJURY!
This appliance may be used by persons with limited physical,
►
sensory or mental capabilities or lack of experience and
knowledge, provided that they are under supervision or
have been told how to use the appliance safely and are
aware of the potential risks.
The appliance must not be used as a plaything by children.
►
Assembly / Disassembly
CAUTION - PROPERTY DAMAGE!
► All accessories are coated with a thin fi lm of oil to protect them from corrosion.
Therefore, carefully clean all of the parts before using the appliance for the
fi rst time, as described in detail in the chapter "Cleaning". After subsequent
usage, always apply a light coating of cooking oil to the metallic components.
NOTICE
► Before using for the fi rst time, remove the protective foil from the control
panel.
Assembling the meat grinder
Unfold the fold-out side. There you will fi nd the step-by-step illustrations for as-
sembling the appliance.
1) Place the transport screw 0 in the meat grinder casing 5.
2) Place the spring q onto the transport screw 0.
3) Then fi t the cross blade w on so that the sharp side points away from the
spring q. Ensure that the square opening in the cross blade w is placed
correctly on the square axle.
│ GB │ IE
■ 26
All manuals and user guides at all-guides.com
SFW 350 C2