Pioneer PREMIER SUPER TUNER III D DEH-P960MP Mode D'emploi page 20

Section
05 Built-in CD Player
Selecting a track directly
When using the remote control, you can select
a track directly by entering the desired track
number.
1 Press DIRECT.
Track number input display appears.
2 Press NUMBER buttons to enter the de-
sired track number.
# You can cancel the input number by pressing
CLEAR.
3 Press DIRECT.
The track of entered number will play.
Note
After entering the number input mode, if you do
not perform an operation within about eight sec-
onds, the mode is automatically canceled.
20
En
All manuals and user guides at all-guides.com
Introduction of advanced
built-in CD player operation
1
1 Function display
Shows the function status.
1 Press OPEN to open the front panel.
2 Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
Track title listRepeat mode (repeat play)
Random mode (random play)Scan mode
(scan play)Pause (pause)Compression
(compression and BMX)Search mode
(search method)Tag read mode (tag dis-
play)
# To return to the playback display, press BAND.
Notes
! When playing audio data (CD-DA), tag display
is not effective even if you turn
Tag read mode (tag display) on. (Refer to
page 29.)
! If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the playback display.
Repeating play
Repeat play lets you hear the same track over
again.