Publicité
Les langues disponibles
Les langues disponibles
Section
04
Tuner
Listening to the radio
4
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1 Frequency indicator
Shows to which frequency the tuner is
tuned.
2 Stereo (5) indicator
Shows that the frequency selected is being
broadcast in stereo.
3 Preset number indicator
Shows which preset has been selected.
4 Band indicator
Shows which band the radio is tuned to, AM
or FM.
5 LOC indicator
Shows when local seek tuning is on.
1
Press SOURCE to select the tuner.
Press SOURCE until you see Tuner displayed.
2
Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
3
Press BAND to select a band.
Press BAND until the desired band is dis-
played, FM-1, FM-2, FM-3 for FM or AM.
16
En
All manuals and user guides at all-guides.com
2
3
1
5
4
To perform manual tuning, briefly press
c or d.
The frequencies move up or down step by
step.
5
To perform seek tuning, press and hold
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
either c or d.
# If you press and hold c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the button.
Publicité
