Benthaus Onyx 8O2K Studio Instructions De Montage page 33

10 min.
Modules (power management)
Operation
4.17 Power boost
The power boost setting makes additional power
available for induction cooking zones. A large quantity of
water can be brought to the boil very quickly.
1. Turn the respective regulator to the right until it stops
and keep it turned for approx. 2 seconds. The power
setting display shows
activated.
2. After 10 minutes the power boost setting will switch off
automatically. The
will switch down to 9.
Please note:
Switch off the cooking zone or set the required power
level to prematurely switch off the power boost setting.
4.18 Power management
For technical reasons two cooking zones always
comprise a module and have a maximum power level.
If this power range is exceeded when a higher power
setting level or the power boost function is switched on
the power management system will reduce the power
setting of the corresponding cooking zone of the module.
The display for this cooking zone will initially blink,
after which the highest-possible power setting will be
consistently displayed.
. The power boost will now be
will go off and the cooking level
ENG
33