Benthaus Onyx 8O2K Studio Instructions De Montage page 31

Suitable for induction cooking
Operation
4.10 Permanent pan recognition
If the hob has permanent pan recognition, a cooking setting
can only be directly switched on via the regulator after a pan
has been detected on the hob and the power display shows
0.
4.11 Switching on the hob and cooking zones
1. Turn the control knob to the right.
The power setting display shows .
1 2 3 4 5 7 8 9
2. Immediately put cookware suitable for induction cooking
onto the cooking zone. The pan recognition device will
activate the induction coil. The pot or pan will be heated
up.
As long as no cooking pot is placed onto the cooking
zone, the display will alternate between the cooking level
set and the symbol
zone it will switch off after 10 minutes for reasons of
safety. Please refer to the Section on pan recognition.
Permanent pan recognition
If the hob has permanent pan recognition, a cooking
setting can only be directly switched on via the regulator
after a pan has been detected on the hob and the power
display shows 0.
4.12 Switching off a cooking zone
3. Turn the regulator to the left to 0.
4.13 Childproof lock
The childproof lock serves the purpose of preventing
children from switching on the induction hob either
accidentally or intentionally. The controls are blocked here.
Switching on the childproof lock
1. Turn the regulators of the front and back cooking zones
simultaneously to the left until they stop and keep them
turned for approx. 2 seconds.
The power setting indicators will show an
the controls will be disabled and the hob will switch off .
Switching off the childproof lock
Turn the regulators of the front and back cooking zones
again simultaneously to the left until they stop and keep
them turned for approx. 2 seconds.to switch off the
childproof-lock. The
Notes
• In the event of a power cut the childproof lock will be
cancelled, i.e. deactivated.
. If no pot is placed on the cooking
will go off .
ENG
for child lock,
31