Télécharger Imprimer la page

Black & Decker CM2060C Manuel D'instructions page 4

Publicité

Les langues disponibles

Les langues disponibles

storing or leaving the mower.
8. Under normal usage, the grass catcher
components are subject to deterioration
and wear. Before each use of the mower,
check the grass catcher components
and the discharge guard and when
necessary replace with BLACK+DECKER
recommended parts only.
9. Mower blades are sharp. Wrap the
blade or wear gloves, and use extra
caution when servicing them.
10. Maintain or replace safety and
instruction labels, as necessary.
This Class B digital apparatus complies
with Canadian ICES-003.
This device complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested
and found to comply with the limits for
a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits
are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
Changes or modifications to this unit
not expressly approved by the party
responsible for compliance could void
the user's authority to operate the
equipment. This Class B digital apparatus
complies with Canadian ICES-003.
WARNING:
SAFETY WARNINGS AND
INSTRUCTIONS FOR ALL TOOLS
This manual downloaded from http://www.manualowl.com
All manuals and user guides at all-guides.com
GENERAL
• THIS TOOL CAN BE DANGEROUS.
Follow all warnings and Safety
Instructions in this manual. The
operator is responsible for following
warnings and instructions in this
manual and on unit. Restrict use of
this mower to persons who read,
understand and follow warnings and
instructions in this manual and on unit.
• Avoid dangerous environment –
don't use lawn mowers in damp or wet
locations.
• Don't Use In Rain.
• Keep Children Away – All visitors should
be kept a safe distance from work area.
• Dress Properly – Do not wear loose
clothing or jewelry. They can be
caught in moving parts. Use of rubber
gloves and footwear is recommended
when working outdoors.
• Use Safety Glasses – Always use face
or dust mask if operation is dusty.
• Use Right Appliance – Do not use
lawn mower for any job except that for
which it is intended.
• USE OF EXTENSION CORDS Make
sure the extension cord is in good
condition before using. Always use
the proper size extension cords with
the tool – that is, proper wire size for
various lengths of cord and heavy
enough to carry the current the tool
will draw. Use of an undersized cord
will cause a drop in line voltage
resulting in loss of power and
overheating. For proper size cords
see chart below.
Minimum Gage for Cord Sets
Volts
Total Length of Cord in Feet
120V
0-25
26-50
(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
Ampere Rating
More Not more
Than Than
0
6
18
6
10
18
10
12
16
12
16
14
• CHECK FOR DAMAGED PARTS.
Before further use of the mower, a
guard or other part that is damaged
should be carefully checked to
determine that it will operate properly
and perform its intended function.
Check for alignment of moving parts,
binding of moving parts, breakage
of parts, mounting, and any other
conditions that may affect their
operation. A guard or other part that is
damaged should be properly repaired
or replaced by an authorized service
center unless otherwise indicated
elsewhere in this manual.
• REPAIRS AND SERVICE. Repairs,
maintenance and any adjustments
4
51-100
101-150
American Wire Gage
16
16
14
16
14
12
16
14
12
12
Not Recommended

Publicité

loading

Ce manuel est également adapté pour:

Cm2060