SECURING THE MOTOR CABLE
(FIGURE J)
CAUTION:
ATTACH CABLE SO
THAT IT DOES NOT BECOME
STRETCHED OR PINCHED IN THE
JOINTS OF THE HANDLES DURING USE
OR FOLDING. THIS CAN CAUSE
DAMAGE TO THE CORD.
The motor cable (24) has to be fixed to
the handles using the cable restraints (25)
that are already attached to the handle.
To clip the cable to the handle:
• Place the handles in operating position,
see "Attaching Lower Handle" section.
• Run the cable up the front of the lower
and upper handles.
• Pull back the cable restraint.
• Slide the motor cable under the clip
and ensure it is fully held in place by
the restraint.
J
25
BAGGING
DANGER:
REMOVE KEY AND
BATTERY PACKS BEFORE REMOVING
SIDE DISCHARGE ATTACHMENT AND
MULCHING INSERT, AND WHEN
OPENING REAR DOOR COVER AND
INSTALLING BAG
• Ensure the side discharge attachment
(26) (Figure M) and the mulching insert
(27) (Figure L) are removed from the
mower before bagging.
• Lift the rear door cover (9) and place the
grass collection bag (8) onto the mower
so the bag hooks (28) rest on the lugs
(29) as shown in Figure K. Then lower
the rear door cover.
K
9
29
28
This manual downloaded from http://www.manualowl.com
All manuals and user guides at all-guides.com
23
8
MULCHING
DANGER:
BATTERY PACKS BEFORE REMOVING
SIDE DISCHARGE ATTACHMENT AND
COLLECTION BAG, AND WHEN
INSTALLING MULCHING INSERT.
• Ensure the side discharge attachment
(26) and the collection bag (8) are not
attached.
• Lift the rear door cover (9) and slide the
mulching insert (27) fully into the mower
as shown in Figure L.
• Ensure the rear door cover fully closes
before turning mower on.
L
SIDE DISCHARGE
DANGER:
BATTERY PACKS BEFORE REMOVING
COLLECTION BAG, AND WHEN
INSTALLING MULCHING INSERT AND
SIDE DISCHARGE ATTACHMENT.
• Ensure the collection bag (8) is removed.
• Lift the rear flap (9) and slide the
mulching insert (27) fully into the mower
as shown in Figure L.
• Lift the side flap (30) and hook side
discharge attachment (26) onto the
mower as shown in Figure M.
• Release the side flap and ensure
the attachment holds in place before
turning mower on as shown in the insert
of Figure M.
M
30
26
12
REMOVE KEY AND
27
REMOVE KEY AND