Publicité
6
Care and Cleaning
6.5. Cleaning Products with Glass Doors
Remove the protection foil on the glass.
There is a coating on the surface of the glass. This
coating minimises stain formation and ensures
that stains and dirt are cleaned easily. Glasses
that are not protected by a coating might be exposed
to permanent bonding of organic or inorganic, air or
waterborne pollutants such as limescale, mineral salts,
unburned hydrocarbons, metal oxides an silicons,
which lead to stains and physical damage in a short
time. Despite regular washing, the glass becomes very
hard to keep clean, though not impossible. As a result,
the clarity and good appearance of the glass reduces.
Hard and abrasive cleaning compounds and methods
increase these defects even further and accelerate the
deterioration process.
*Non-alkali, non-abrasive and water-based cleaning
products must be used for routing cleaning procedures.
For the coating to have long service life, alkali or
abrasive substances must not be used during cleaning
processes.
These glasses were subject to a tempering process to
increase their impact and breakage resistance.
As an additional safety measure, there is a safety film on
the back surfaces of the glasses to ensure that they will
not harm the environment in case of breakage.
Refrigerator / User Guide
26 /36 EN
Publicité
