Eschenbach vario DIGITAL FHD Advanced Série Mode D'emploi page 20

Table des Matières

Les langues disponibles

The channel selected on the remote control and in the menu must be identical. Only

then can the remote control be used. Channel 1 is used by default.

Swapping navigation keys

Select this icon and press the

pairs for moving the image selection. Horizontal movement is then carried out using the

right-hand button pair, vertical movement using the left-hand button pair.

Setting the reading speed

Select this icon and press the

image moves across the display when using the image scrolling buttons:

- low scroll speed

- medium scroll speed

- high scroll speed

Enabling/disabling DLS

Select this icon and press the

function. If the function is disabled, the symbol is crossed out. If you would like to enable

the function, press the

Enabling/disabling vertical DLS

Select this icon and press the

(DLS). If this icon

Enabling/disabling the photo button

Select this icon to enable or disable the photo function of the

button is disabled, the symbol is crossed out. If you would like to enable the

press the

button again.

button e to switch the functionality of the lateral key

button e to set the scroll speed at which the camera

button e to enable the Dynamic Line Scrolling (DLS)

button again.

button e to disable vertical Dynamic Line Scrolling

is shown, only horizontal DLS is available.

- 20 -

button e. If the photo

button,

Table des Matières