Eschenbach vario DIGITAL FHD Advanced Série Mode D'emploi page 11

To confirm, press the
the field of vision available for DLS. If you press the
hidden. Now you can adapt the zoom factor by using the i knob.
With buttons d, f, j und k you can move the displayed section horizontally or vertically
without having to move the reading material itself. The image selection can be moved
upward with arrow key d, downward with arrow key f, to the right with arrow key j,
and to the left with the arrow key k. If you press one of the arrow keys twice in rapid
succession, the screen section is moved to the respective end. For example, you can
quickly find the beginning of the next line by pressing the k arrow key twice.
To exit the reading mode, hold down the
press the button e again to close the menu. Thereafter, the entire magnification
range is available again.
The selected reading mode is reset when the device is turned off.
Alternatively, the DLS can also be operated using the remote control (see "Remote
control" chapter on page 30).
Turning the reading line/row on and off
Press the r button to turn the reading line on. Press it again to hide the line.
Special button functions
X Press and hold the
Scrolling (DLS)" chapter on page 28).
X Press and hold the
"Deactivating/activating autofocus" on page 30).
X Press and hold the reading line button r to change the reading material brightness
(see Chapter "Adjusting the reading material brightness" on page 36).
False color display
To display the camera image in false colors for increased contrast, turn rotary knob w
until the required false color rendering is displayed. By default, the false colors are preset
button e. The device then zooms to the preset width. That is
button e to activate/deactivate DLS (see "Dynamic Line
button u to turn the autofocus function off (see also Chapter
- 11 -
button e again the menu will be
button e and select the
EN
symbol. Then