Publicité
Les langues disponibles
Les langues disponibles
K
L
19
K
L
INSPECT IMPACT INDICATOR FOR
RUPTURED OR TORN RED STITCHING.
IF STITCHING IS RUPTURED OR TORN,
REMOVE FROM SERVICE.
JACKET MATERIAL: NOMEX/KEVLAR
CORE MATERIAL: POLYESTER
THIS PRODUCT COMPLIES WITH THE FOLLOWING STANDARDS ONLY IF MARKED
WITH THE CORRESPONDING LETTER CODE UNDER "STDS" SECTION BELOW
A = ANSI Z359.1 B = OSHA C = ANSI A10.32 D = ASTM F887
E = ANSI Z359.3 F = ANSI Z359.4 G =
10
MANUFACTURER'S INSTRUCTIONS
MUST BE READ AND UNDERSTOOD
PRIOR TO USE. INSTRUCTIONS SUPPLIED WITH THIS PRODUCT
AT TIME OF SHIPMENT MUST BE FOLLOWED. AVOID CONTACT
WITH SHARP AND ABRASIVE EDGES. MAKE ONLY COMPATIBLE
CONNECTIONS. NOT FLAME OR HEAT RESISTANT. DO NOT
REMOVE THIS LABEL. FAILURE TO HEED WARNINGS AND
INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR
DEATH. ANY UNIT WHICH HAS SEE FALL ARRESTING
SERVICE SHOULD NOT BE USED AFTER SUCH SERVICE.
9515810 Rev. A
Publicité
