Publicité
Les langues disponibles
Les langues disponibles
Model WC-28DZ and WC-46DZ
1.
Remove the front ventilation grille
adjustable ventilation grille
○
○
the screws
3
&
4
A
E
A
A
NOTE:
For model WC-28DZ, the step of
removing the ventilation grille is not needed.
2.
Remove the bottom hinge plate
unscrewing the four lock screws
to hold the glass door firmly after removing the
screws. (Fig. 2).
3.
Gently pull down to remove the glass door from
the right top hinge and place it on a padded
surface to avoid the risk of damage. Then
remove the right top hinge
4.
Unscrew and transfer the hinge pin of the
bottom hinge plate
5.
Pop out the cover caps on the left side of
cabinet and use them to
on the right hand side.
6.
Screw the alternative left top hinge
in the fittings,
on the left hand side of cabinet.
(Fig. 4).
7.
Rotate the door 180° and then relocate the door
to the designated position. Then screw the
bottom hinge assembly on the left designated
position and tighten it after the door is leveled.
(Fig. 2).
8.
Reassembly
the
NOTE:
For model WC-28DZ, the step of
reassembling the ventilation grille is not
needed.
○
and the
2
A
E
A
○
by unscrewing
1
A
E
A
. (Fig. 1).
E
A
○
5
A
○
. Make sure
6
A
E
A
○
. (Fig. 3 & 4).
7
A
E
A
○
to the opposite side.
5
A
E
A
cover the screw holes
○
, included
9
A
E
A
ventilation
Model WC-118TZ
1. Remove the bottom hinge
the four lock screws
glass door firmly after removing the screws. (Fig.
1).
2. Gently pull down to remove the glass door from
the right top hinge and place it on a padded
by
surface to avoid the risk of damage. Then
E
A
remove the right top hinge
3. Pop out the cover caps on the left side of
cabinet and use them to
on the right hand side.
4. Screw the alternative left top hinge
in the fittings,
(Fig. 3).
5. Unscrew and transfer door supporter
opposite side. At the same time remove the
stopper pin
position of the bottom hinge. (Fig. 5&3).
6. Unscrew and transfer the door adapter
opposite designated position. (Fig. 2).
7. Relocate the glass door to the designated
position. Then screw the bottom hinge on the
left designated position and tighten it. (Fig. 5).
8. Recheck and adjust the door alignment by
loosening the screws
adapter
door is levelled. (Fig. 5).
grilles.
9
1 2
3
4
5
1
○
1
A
E
○
2
. Be careful to hold the
A
E
A
○
8
.
A
E
A
cover the screw holes
on the left hand side of cabinet.
○
6
to the opposite designated
A
E
A
○
5
a nd moving the door
A
E
A
○
4
. Tighten the screws
A
E
A
9
4
by unscrewing
A
○
7
, included
A
E
A
○
9
to the
A
E
A
○
4
the
A
E
A
○
5
after the
A
E
A
Publicité
