Publicité
Les langues disponibles
Les langues disponibles
USE AND CONTROL – DUAL ZONE
Model WC-28DZ and WC-46DZ
The Controls of Your Unit
POWER
To turn the appliance on or off, press and hold the
button for 1 second.
NOTE: Pressing the
the audible alarm when the alarm is on.
UP
Used to increase (warm) the set temperature by 1°F
or 1ºC.
DOWN
Used to decrease (cool) the set temperature by 1°F
or 1ºC.
LIGHT
Used to turn the inner light on and off.
Display
Displays the temperature and service indicators.
is for the UPPER temperature zone and
the LOWER temperature zone.
ºF/ºC Selector
Program
the
temperature
Fahrenheit or Celsius. To change the temperature
from Fahrenheit to Celsius or from Celsius to
Fahrenheit, press and hold the LIGHT button for 5
seconds.
Setting the Temperature Control
•
The unit has two separate temperature zones.
The temperature of both zones can be set
between 41ºF and 68ºF (5ºC and 20ºC).
•
When the unit is plugged in for the first time, the
unit will power up automatically to the preset
defaults. The default temperature for the
UPPER temperature zone is 50ºF (10ºC) and
for the LOWER temperature zone is 60ºF
(16ºC).
•
You can press the left side UP and DOWN
buttons to control the internal temperature of
the UPPER temperature zone and press the
right side UP and DOWN buttons to control the
internal
temperature
temperature zone. When you press the UP or
DOWN buttons, the displayed temperature will
change accordingly.
NOTE: The temperature set for the LOWER
temperature zone must always be just as high,
or higher, than the UPPER temperature zone.
button once can switch off
display
in
either
of
the
LOWER
For optimal performance, the set temperature of
the two zones should differ by at least 7°F or
4°C.
•
The temperature that you desire to set will
increase 1ºF or 1ºC if you press the UP button
once. The temperature will decrease 1ºF or 1ºC
if you press the DOWN button once. The
display will flash while you make your selection.
USE AND CONTROL – THREE ZONE
Model WC-118TZ
The Controls of Your Unit
Upper Control Unit
Lower Control Unit
POWER
is for
To turn the appliance on or off, press and hold the
button for 1 second.
NOTE: Pressing the
the audible alarm when the alarm is on.
UP
Used to increase (warm) the set temperature by 1°F
or 1ºC.
DOWN
Used to decrease (cool) the set temperature by 1°F
or 1ºC.
LIGHT
Used to turn the inner light on and off.
Display
Displays the temperature and service indicators.
is for UPPER temperature zone,
temperature zone and
zone.
ºF/ºC Selector
Program
Fahrenheit or Celsius. To change the temperature
from Fahrenheit to Celsius or from Celsius to
Fahrenheit, press and hold the LIGHT button for 5
seconds.
11
button once can switch off
is for LOWER temperature
the
temperature
display
is for MIDDLE
in
either
Publicité
