Publicité
OPERATION
Before using the oven for the first time
Remove packaging, clean the interior of
the oven.
Take out and wash the oven fittings
with warm water and a little washing–up
liquid.
Switch on the ventillation in the room or
open a window.
Heat the oven (to a temperature of
250°C, for approx. 30 min.), remove any
stains and wash carefully.
Important!
In ovens equipped with the elec-
tronic programmer, the time "
will start flashing in the display
field upon connection to the power
supply.
The programmer should be set
with the current time. (See Elec-
tronic programmer ). If the current
time is not set operation of the
oven is impossible.
The electronic prgrammer is equip-
ped with electronic sensors wich are
switched on by touching or pressing
the sensor surface for at least one
second.
Each sensor reaction is confirmed
by the beep.Keep the sensor surface
clean at all times.
Important!
To clean the oven, only use a cloth
well rang out with warm water to
which a little washing-up liquid has
been added.
78
0.00"
Publicité
