Publicité
AIR MOTOR
AIR MOTOR REVERSING BLOCK (REFER TO DOC. 573.087.040)
Guards (air motor cover, coupling shields, housings ...) have been designed for
The manufacturer will not be held responsible for bodily injury or failure and / or
damage to property due to removal or partial removal of the guards
Disassemble the air motor cover (6 or 31) by removing the nut (4
or 33).
Dissociate the female yoke from the reversing block lever (9a /
9b).
Dismount the reversing-block by removing the screws (11 or 28).
Remount the new reversing-block in the reverse order of the
disassembly sequence.
CAUTION : the number of spirals must equally be
distributed on each fastening parts in order to get the above
dimension.
DEGREES OF WEAR
The wetted parts in contact with the material are subject to wear with time. It depends, of course, on the
rates and duration of pump operating; also on the material handled.
Under normal operating and servicing conditions, with standard filled material not including foreign
matters or chemically aggressive, the average working life can be estimated as :
-
1 million strokes for the tightness seals.
10 millions strokes for the bellows.
-
SAMES KREMLIN
safe use of the equipment.
- 4 -
31.85 mm
±0.5
N° : 578.155.110-UK-2108
Publicité
