Publicité
Les langues disponibles
Les langues disponibles
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
10 watts per channel minimum continuous average power into 4
ohms, both channels driven, from 30 to 20,000 Hz with no more
than 1.0% total harmonic distortion.
Other Specifications
Tuner section
FM
Tuning range
Antenna terminal
Usable sensitivity
Selectivity
Signal-to-noise ratio
Harmonic distortion at 1 KHz
Separation
Frequency response
Capture ratio
AM
Tuning range
Antenna terminal
Sensitivity
Cassette player section
Tape track
Frequency response
Signal-to-noise ratio
Wow and flutter
Power amplifier section
Outputs
Speaker impedance
Maximum power output
General
Tone controls
Loudness
Power requirements
Mounting dimensions
Mass
Accessories supplied
87.5 - 107.9 MHz
External antenna connector/Power antenna relay control lead
13 dBf (75 ohms)
z
more than 70 dB at 400 kHz
65 dB (stereo), 68 dB (monaural)
0.9% (stereo), 0.5% (monaural)
35 dB at 1 kHz
30 — 15,000 Hz (+3 dB)
2.0 dB
530 — 1,710 kHz
External antenna connector/Power antenna relay control lead
32 uV
4-track 2-channel stereo
40 — 15,000 Hz
Cassette type
Dolby B | Dolby off
TYPE Hi, IV
66dB
| 58dB
TYPE |
| 63dB
| 55dB
0.13%
Speaker outputs (sure seal connectors}
3.2 — 8 ohms
22 W x 2 (at 4 ohms)
6 W x 4 (at 4 ohms)
Bass +8 dB at 100 Hz
Treble +8 dB at 10 kHz
+10 dB at 100 Hz
12 V DC car battery (negative ground)
Approx. 178 x 50 x 134 mm (w/h/d)
(71/8 x 2 x 53/8 in.)
Approx. 1.2 kg (2 Ib. 10 oz.)
Mounting hardware (1 set)
Power connecting cord (1)
Design and specifications subject to change without notice.
Publicité
