SETTINGS
Programming FM radio stations –
manually
1
Select the audio sources FM radio with
»MODE/AL«.
2
Open the menu with »MENU«.
– Display: »«, then the name or the frequency
of the FM radio station.
3
Press and hold down
+« to search the desired radio
»TUNING
station.
– The automatic station search starts, and stops
at the next station with a strong signal;
or
briefly pressing
»–
TUNING« or
until you have found the frequency you want.
– The frequency changes in steps of 50 kHz.
4
To store the FM radio station on a preset, press
and hold down the required preset button »1«
to »5«, until »« appears.
Press »+5« and the required preset button »1«
to »5« for presets 6 to 10.
Note:
The device normally scans for FM radio
7
stations which are strong enough to get
good reception. To scan radio stations with
weak signal:
Open the menu »« with »MENU« and
confirm with »SEL/i/ATS«.
Select the option »« with
and confirm by pressing »SEL/i/ATS«.
Switch back to normal sensitivity by repeat-
7
ing the setting and choosing the option
»«.
20
ENGLISH
---------------------------------------------------------------------------------------------------------------------------------------
TUNING« or
»–
»TUNING
»– TUNING
+«
Setting the clock format
(12 or 24 hours)
1
Press »ON/OFF« to switch on the device.
– Display: e.g. »«.
2
Open the menu with »MENU«.
3
Select the option »« with
confirm by pressing »SEL/i/ATS«.
4
Select the option »« with
confirm by pressing »SEL/i/ATS«.
– Display: »«.
5
Press »SEL/i/ATS« again and select the
desired clock format (12 or 24 hours) with
»– TUNING
+«
6
Press »SEL/i/ATS« to confirm setting.
7
Press »MENU« to end the setting.
Updating the time – automatically
The device will normally update the time automat-
ically, when a time signal is received. You can
select from which source (DAB or FM) the update
starts or you can disable this function.
1
Press »ON/OFF« to switch on the device.
– Display: e.g. »«.
2
Open the menu with »MENU«.
3
Select the option »« with
»– TUNING
»SEL/i/ATS«.
4
Select the option »« with
confirm by pressing »SEL/i/ATS«.
– Display: »«.
5
Select the option »« with
confirm by pressing »SEL/i/ATS«.
– Display: »«.
6
Select the desired option (Any, DAB or FM)
»– TUNING
with
or select the option »«, if you want to disable
the update.
7
Press »SEL/i/ATS« to confirm setting.
8
Press »MENU« to end the setting.
»– TUNING
»– TUNING
+«.
+« and confirm by pressing
»– TUNING
»– TUNING
+«;
+« and
+« and
+« and
+« and