Publicité
Les langues disponibles
Les langues disponibles
CONNECTIONS
Before connecting the AC cord
The rated voltage of your system shown on the rear panel is 120
V AC. Check that the rated voltage
matches
your local voltage.
IMPORTANT
Connect
the speakers,
antennas,
and all optional
equipment
first.
Then connect
the AC cord in the end.
There
are no differences
between
the front speakers.
Both
speakers
can be connected
as L (Left) or R (Right).
7 Place the CD player unit on top of the tuner/
amplifier unit and plug in the connector
of the
flat cable as shown below.
Note that the connector
can be plugged in in only one direction
with the flat cable facing right.
~CD,la,erunit
2
Connect the speaker cords to the tuner/amplifier
unit.
The speaker cord from the right speaker should be connected
to the "R" jack and the cord from the left speaker
to the "L
jack.
"R''ijack
After plugging
in the connector,
allow adequate
clearance
between
the flat cable and the ventilation
openings.
=
#
To the left
speaker
To the right
speaker
Rig
T
Speaker
cord
G--
AC cord
4
ENGLISH
Publicité
