Publicité
Les langues disponibles
Les langues disponibles
PRESETTING STATIONS
PRESET NUMBER TUNING
+
II
F
u,>b
TUNER/
I
b
TUNER/
BAND
BAND
The unit can store a total of 32 preset stations.
When a station
is stored,
a preset number
is assigned
to the station.
Use the
preset number to tune in to a preset station directly.
1 Press the TUNER/BAND
button to select a band.
Then, press the K+
or
PI button (or the ++
/
~
button) to select a station.
2 Press the 11 button to store the station.
A station
is assigned
a preset
number,
beginning
from 1 in
consecutive
order for each band.
Preset number
Frequency
3 Repeat steps 1 and 2.
1 Press the TUNER/BAND
button to select a band.
2
Press
the
numbered
buttons
on the
remote
control to select a preset number.
Example:
To select preset number
15, press the +10 and 5 buttons.
To select preset number
10, press the +10 and O buttons,
Another method to tune in to a preset station
Press the TUNER/BAND
button to select a band.
Then press the E
button.
Each time the button is pressed,
the station with the next higher
number
is selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the
button, and press the II button within 4 seconds.
The preset numbers
of all other stations
in the band with higher
numbers
are also decreased
by one.
m
Each band can only store a maximum
of 16 preset stations.
1()
ENGLISH
Publicité
