Publicité
Les langues disponibles
Les langues disponibles
To program on the display window on the main
unit, operate as follows:
(1) Select a title/group using the number
buttons.
(2) Designate a chapter/track number using the
number buttons.
• Refer to "How to use the number buttons"
(page 15).
• The program number will be displayed on
the lower display window (Ex.: "P2").
(3) Repeat the above operations (1) and (2) to
complete the program. Then, advance to
Step 3.
NOTE
• The group/title number flashes on the display
window after making each program step.
• Only for a DVD VIDEO, DVD AUDIO, VCD, or an
MP3/WMA: If you press ENTER instead of
designating a track/chapter number,
displayed and all of the tracks/chapters in the
selected group/title are programmed.
3
Press DVD/CD
• To resume normal playback, press PLAY
MODE repeatedly to show the playback
indication on the display window on the
main unit while the disc is stopped. The
program content will not be erased.
• The following operations erase the program
content:
• Press CANCEL repeatedly (Programs
will be erased one by one)
7
• Press
while the disc is stopped
• Open the disc tray
• Turn off the power
"
ALL
"
is
3
.
Playing the disc in a
random order
(Random Playback)
1
Press PLAY MODE repeatedly
to display "RANDOM" on the
display window on the main unit
while the disc is stopped.
• "RANDOM" will also be displayed on the TV
screen.
2
Press DVD/CD
• The same chapter or track will not be
played twice.
• To resume normal playback, press PLAY
MODE repeatedly to show the playback
indication on the display window on the
main unit while the disc is stopped.
• Random Playback will also be canceled by
carrying out the following operations:
• Open the disc tray
• Turn off the power
• The previous track will not be returned to
4
even if
is pressed repeatedly during
Random Playback (the beginning of the
current chapter or track will be returned to).
Advanced operations
3
.
21
Publicité
