Publicité
Les langues disponibles
Les langues disponibles
PREPARING YOUR MACHINE
1
2
Wash and dry ac-
Insert the drip tray
cessories; including
with cup tray.
water tank.
4
5
Insert the tank.
Plug in machine
and switch on the
main power.
2
SETTING THE MACHINE FOR FIRST USE
1
3
Fill water tank.
The coffee buttons flash
to indicate the machine is
heating up.
INSERT
........................
4
6
The machine
performs a self-test
INSERT
CLOSE
........................
Place a container with a
signaled by the
minimum capacity of 500
sequential flashing
ml under the coffee outlet
of lights.
and steam wand .
2
Insert filter basket into
portafilter.
CLOSE
5
INSERT
CLOSE
........................
Press the
button.
Repeat this operation 5
times.
3
Attach the portafilter to the
machine aligning its handle
with "INSERT", then turrning it
to the right until it is aligned in
the "CLOSE" position.
6
Turn the hot water/steam dial to
the
position and deliver
to empty the water tank; then turn
the knob to the 0 position. This is
to purge the steam circuit before
frothing or steaming your milk.
Publicité
