Murray 620000x30NC Manuel De L'utilisateur page 10

KNOW YOUR SNOW THROWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR SNOW
THROWER. Compare the illustrations with your SNOW THROWER to familiarize yourself with the
location of various controls and adjustments. Save this manual for future reference.
Chute Deflector
Discharge Chute
Auger Assembly
Chute Control Rod -
tion of snow discharge
Chute Deflector -
the snow is thrown.
Discharge Chute -
the snow is thrown.
HOW TO USE THE SNOW THROWER
TO STOP THE SNOWTHROWER
To stop the auger or motor, release the control
switch lever.
TO CONTROL SNOW DISCHARGE
1. Turn the chute control rod to set the di-
rection of the snow throwing.
2. Loosen the wing knob on the chute de-
flector and move the deflector to set the
distance. Move the deflector up for more
F-041020C
OPERATION
Upper Handle
Lower Handle
Changes the direc-
.
Changes the distance
Changes the direction
Chute Control
Rod
Auger Housing
Ignition Switch Key -
and turned to the "UNLOCK" position to
start the motor.
Control Switch Lever -
and stop motor.
distance or down for less distance. Then,
tighten the wing knob (See Figure 5).
Wing Knob
10
Control Switch
Lever
Key
Figure 4
Must be inserted
Used to start
Figure 5