Publicité
Les langues disponibles
Les langues disponibles
Why is there no sound coming
from the TV?
Make sure the volume is up and MUTE is off.
® Confirm the TV speakers are set to ON by pressing MENU
and selecting "Audio"-->
"Advanced audio". (p.32)
® Check that the correct SAP (Secondary Audio Program) is
selected by pressing the SAP button on the remote control. (p.15)
® If the TV is connected to a Panasonic Home Theater via
HDMI cable, then check VIERA Link controls. (p.22)
® If the TV is connected to a Home Theater via optical cable,
then: Check the connection, the audio system is on, the
correct input is selected.
® Check "HDMI 1 in" or "HDMI 2 in" analog/digital
audio
Why is the sound unusual,
distorted, low volume or in
another language?
Check that the correct SAP (Secondary Audio Program) is
selected by pressing the SAP button on the remote control.
connected to the TV are secure.
settings. (example: try changing the box's Audio Range to 'narrow')
Why is there a clicking, ticking
or buzzing sound coming from
the TV unit?
_
When TV power is turned on or shut off there are electrical
components that make a click sound. This is normal operation.
I®
Changes in the temperature and humidity of the room may
cause thermal expansion and contraction that can produce
What
is the easiest
and best
way to connect
a High-Definition
Cable
or Satellite
box to the TV?
Why is there
no yellow
jack
(video
I input)
on the back of
the TV?
Why does the CC button not
display Closed Caption?
Why does the screen and back
cover of the TV get warm?
Why
doesn't
the Remote
Control
work?
Why is the "ANT/Cable"
option
at the top of the "Input select"
menu gray-out and cannot be
selected?
Use an HDMI cable. It carries both digital video and audio
signal in HD. HDMI cable is the only cable needed to
connect an HD device to the TV.
The Video 1 input is shared with the Component input.
Just connect the yellow plug into the green jack. Be sure to
connect the red and white audio plugs into the appropriate
red and white audio inputs. (p. 10)
The main unit radiates heat and some of the parts may
°_
become hot. This is normal operation and does not affect
the performance
of the set.
® Ensure good ventilation.
® Do not block the ventilation
holes of the TV and do not
Check that the batteries are fresh, are of the same type
°_
and are installed with the correct polarity (+ & -).
® To operate other devices, such as changing channels when_
using Cable or Satellite boxes or operating non-Panasonic
During "First time setup", step 3, you indicated that the
"Antenna/Cable
in" connector is "not used" (p.13). This is the
proper setting if the TV is connected to a Cable or Satellite
box via any of the other inputs. To re-activate the "ANT!
Cable" input, press MENU, select SETUP and then redo the
@
"11
..Q
r-
>
0o
(I)
O_
O
r-
&
o
Oo
Some menu items are grayed-
out and cannot be selected.
Why?
I
Depending on certain modes or the selected input, some
only available when the FORMAT is changed to zoom mode.
43
tc_L3232c_en_O608Jndb
43
2010/12/24
13:40:2:
I
Publicité
